Most car batteries must be replaced numerous times throughout the years. Batteries often fail when they get old or when they are completely drained. Shopping for a replacement battery is not difficult. However, several things must be considered during the buying process. Also, certain procedures must be implemented to protect the battery after it is installed. Finally, once the battery is totally drain, it should be disposed in an environmentally safe manner.
Car Battery Batteries – Maintenance AdviceIf you buy a maintenance-free battery, you won’t have to inspect the electrolyte levels. Although absorbent glass mat batteries are much safer, they have a higher price tag. However, if your car’s design makes the process of reaching the battery difficult, an AGM battery is the best solution.
Buy A Battery That Suits Your Driving Needs
Before you go out and buy a new battery, take notes so that you can select the proper battery design and size for your specific vehicle. You can find this information in the owner’s manual.
Another thing to consider is the driving conditions and climate in your neighborhood. Some batteries cannot handle high temperatures very well. Increased heat leads to corrosion and lower electrolyte levels.
Car Battery Batteries – Buying Advice
Every battery loses energy when over time. To ensure a longer battery life, select a unit that is under six months old. The shipping code for the date can be found on the case. The code varies depending on the manufacturer. Usually, the month is determined by a letter, and the year is determined by a number.
Purchase a battery that has a plastic loop because the handle makes lifting and transporting easier. Since a battery weights 40 pounds, the handle can help you lower it into the tray.
When your battery gets old, consider recycling it instead of tossing it into the trash. The toxic acid and lead in the battery can be recycled. If you do not have access to a recycling facility, a retailer can properly dispose the battery.
Always talk to someone in the store before you buy a battery. At some locations, you may have to pay a fee to recycled a battery. However, after you return the battery for recycling, the retailer will provide a refund.
There are plenty of different battery chargers out there, so how do you know if the one you are about to buy is the one you need?
The first thing you need to know is what kind of battery you have. Is it Maintenance Free, Wet Cell (flooded), AGM (absorbed glass mat), Gel Cell or VRLA (valve regulated lead acid). A good number of chargers will work for all of them except Gel Cell. However, there are also some Gel Cell chargers that can work with other types as well.
Gel Cell batteries are ones with a silica type gel that the electrolyte is suspended in. It it commonly mistaken for AGM, because both of those battery types have liquid in them and can ensure that none of that liquid leaks if the battery breaks.
The type of battery is not all you have to know. How many Amp hours does it store? In order to make sure that your battery does not take 11 hours to charge because the charger is not ideal, take the amp hour rating of the battery divided by the amps, and add 10% for what it would take to top off the battery. For example, a 10 amp charger would take about 11 hours to do a full charge on a battery that has 100 amp hours, or 6 hours to do a full charge on a battery with 50 amp hours.
Now that you know all of that, think about what you are actually using the charger for. Is it to keep your car or motorcycle from losing its charge if you don’t ride it for a few months? If that’s the case, a low current charger will work just fine. But if you need something to charge quickly for more immediate use, a faster charger is better for your purposes. If you have an RV, maybe you will want a charger that doubles as a power supply. Or if the charger will be outdoors a lot, such as if you need it while camping or traveling, a waterproof charger may be better than a standard one. And if you need to charge several batteries at once, there are chargers that do that, too.
Overall, if you know what type of battery you want a charger for, you have the most important part covered, because that makes it easier to determine whether or not the charger will work. After that, it depends on how fast you want the battery to charge for your purposes.
Multi-battery isolators have the ability to charge more than one battery simultaneously from a single power source, not requiring a parallel connection of the battery terminals. The main reason that this is beneficial is due to the fact that a weaker battery connected to a stronger battery will end up draining the charge from the stronger battery. One battery is dedicated to holding the charge for starting up the vehicle, the other battery used for a range of things, including car radio equipment or powering portable devices. Their purpose is to ensure that the starting battery has enough power so that the engine can start and batteries can recharge in case the auxiliary battery fails or drains too much energy.
These isolators are normally used in larger vehicles rather than regular automobiles, like recreational and utility vehicles, boats and planes; they are used in vehicles with large, high-power car stereos and off road vehicles to accommodate high current loads.
In order to determine the correct multi-battery isolator for one’s vehicle, there are a few factors. Size is an important factor. The isolator should have an amperage rating equal to or greater than the peak current output in order to interact properly with the vehicle’s alternator system. Utilizing the recommended wire sizes for specific connection distances is also a factor to optimize the use of the right isolator. Choosing the correct isolator also depends on the number of alternators one has or the amount of desired batteries the system will charge.
General Power, Inc. of Tucson, Arizona pride themselves in their knowledge and experience with batteries and multi-battery isolators. They hold over sixty years of family history in Arizona. With their constant learning during manufacturing and the production of batteries designed to perform longer in Arizona, General Power have been able to outlast over twenty competitors.
With their superior experience and consistent progress toward advancing batteries in any way they can, they have obtained the privilege to scrutinize dozens of national and international battery manufacturers, testing their ability to make the best batteries for the future. Member of the Power-Partners Program, they extend better pricing of quality products to each one of its customers. They have handled over 500 million pounds of batteries, making $200 million in sales and economic spending, selling products in 5 different countries with private-labeling done by over twenty regional, national, and international manufacturers.
Please call with your year, make, cc’s and model for exact price and capacity.
Noise can be a huge problem while hunting because it scares off the animals, but there are ways to reduce the sound of your ATV.
Step One – Secure The Metal Components
All loose metal components on your ATV should be bolted or tied down to the racks securely. Then, place a noise canceling material between each surface, such as a rubber mat.
Step Two – Inspect The Flange
If your ATV has cracks or leaks, it may backfire when you decelerate. To prevent this problem, examine each welded joint on the tubing for leaks. Cracks commonly occur where the engine connects to the pipe.
Step Three – Maintain The Wheel Bearings
Typically, you should inspect your wheel bearings often because water or mud will make them screech. If you wash your ATV thoroughly before you store it, you can embark on your next hunting session quicker.
Step Four – Inspect Your Brakes
Your brakes can also produce sounds in the wild. This is why you must check them often; there should be material on the pads.
By following these steps, you can hunt confidently without worrying about scaring the animals. However, there is one more very important thing that you must understand before you embark on your hunting adventure.
Maintaining Your ATV Batteries
If you take numerous ATV hunting trips each year, your battery could run out of juice while you are hunting. An ATV battery has a maximum voltage that it can produce, which is determined by the manufacturer. The battery’s capacity, however, determines how fast the current travels through the battery each second. So, when you shop for an ATV battery, you must select one that is designed for your ATV. If you choose the wrong battery, your ATV will overheat and waste power.
How To Choose Proper Auto Batteries
If you need help selecting auto batteries for your hunting vehicle, read your ATV manual. Recommendations about ATV batteries can also be found on the ATV manufacturer’s website. Please call us with your year, make, cc’s and model for exact price and capacity. Our 6,000 sq. ft. building warehouses over $500,000 in various replacement batteries and battery related items. We carry a variety of different terminal connections. If you’re having difficulty finding a particular motorcycle or ATV type, please call to speak to one of our experienced technicians for advice.
Also remember to bring extra flashlight batteries. Purchase high quality flashlight batteries because they will last much longer.
Virtually every golf course in America depends on the use of motorized golf carts. Although electric golf carts are generally very dependable, they still need to be properly maintained. Here are some important maintenance tips for the owners of a battery-powered golf cart.
Inspect the lights
The brake lights, taillights, turn signals, and headlights all need to be in working order. This is especially true for the street-legal golf carts. Most faulty lights are caused by either a bad bulb or a blown fuse.
Low tire pressure forces an electric golf cart’s motor to consume too much of the battery’s energy supply. Always check the tire pressure with a digital gauge prior to driving the golf cart. A leaky tire can usually be traced to a puncture or cut.
In order to work effectively, golf cart batteries need to be fully recharged on a regular basis. Deep cycle batteries also need to be periodically refilled with distilled water. If you notice the presence of wet spots under the battery, this is a key indication that the battery is leaking fluid. When selecting a replacement battery, remember that wholesale golf cart batteries are typically less expensive. To ensure the longevity of a golf cart battery, the terminals need to remain free of corrosion at all times. Placing electrical grease around the battery terminals is a great way to prevent oxidation.
Mirrors and windshield
Dirty windshields and mirrors can dramatically impair a driver’s visibility. Before heading out to the course, clean your golf cart’s windshield using a mild glass cleaner and a lint-free towel.
Check the steering wheel
The steering system is one of the most neglected components on a golf cart. Occasionally greasing the steering system will certainly help to minimize the amount of wear and tear placed on the steering column.
Examine the brakes
The braking system is the most important safety feature on a golf cart. If the brakes begin to squeal or experience a decrease in performance, they need to be examined as soon as possible.
Before attempting to travel long distances, take the time to test the gears on your golf cart. Be sure that the transmission selector switch has been completely pushed into the correct slot before calling a repairman to fix the issue.
Do you like to get away for a weekend on the lake to do some fishing, or just to go for a cruise in your boat? After a long week of work and hustle and bustle, few things compare to loading your boat on the back of your trailer and towing it behind your truck as you ride off to the lake. But before you can do that, there are several things you should do in order to prepare your truck and boat for a weekend on the lake.
The first step in preparing your boat and truck is to make sure that you have the right size trailer that can fit the boat size on it, and also make sure your truck is able to carry the weight of the boat without any problems. When you load the boat onto the trailer, you’ll want to take care that you do not damage any parts of the body or engine. The boat should be stored away under a protective covering when it isn’t in use.
The second part is to make sure that the boat’s engine components have been checked including gasoline, oil, spark plugs, cooling system, transmission fluid, propeller, engine belts, and other important parts. When you check the engine, perhaps the most important part is your electrical system as you will need the power of your battery in order to start your boat. When you put the boat into storage, it’s usually wise to remove the battery from the boat and store it in a room of safe temperatures. You will want to check to make sure it hasn’t been corroded, running low on juice, and the wires are still intact.
If you need new batteries for your boat, you can select from a wide variety of marine batteries that are designed for heavy use. The most commonly used batteries are deep cycle batteries, which are known to have a more constant flow of electricity into your boat engine for prolonged use and to add more power. These batteries also come with a 1-year warranty so if they don’t work, you can return them and get a new one free. Don’t leave your boat without power, buy a battery from General Power Batteries so you can spend quality leisure time out on the water.
Whether you are an ATV rider or a motorcycle enthusiast, nothing beats being able to enjoy an entire weekend of riding. In order for your machine to perform at its best, it must be properly prepared for the adventure ahead. Here are some tips for preparing your all-terrain vehicle or motorcycle for a weekend ride.
Check the fuel supply
Due to their overwhelming excitement, some people tend to forget to check their vehicle’s fuel supply. Running out of gas in the middle of nowhere is a very helpless feeling. If your bike has been in storage for a while, be sure to drain out the old fuel. Gas loses octane over time.
Check the tire pressure
The tire pressure is important for a number of reasons. Not only does extremely low tire pressure force the engine to work harder, but it also dramatically increases the chances of a tire blowout. An exploding tire can cause the motorcycle rider to suddenly lose control. If a tire tends to lose pressure quickly, there is likely a puncture or leak.
The battery is one of the most critical components on your ATV or motorcycle. A motorcycle battery must be fully charged in order to effectively crank the engine. In the event that you plan to store your bike for a long period of time, remove the battery and keep it in a dry area. Depending on the temperature, your motorcycle battery may lose some of its charge over time. Charging it once a week will help to avoid any problems. Batteries that have surpassed their expiration date need to be replaced with a new unit.
The motor oil should never be overlooked. Take the time to check the oil level before each ride. A low level of oil can cause the engine to suddenly lockup while riding. The recommended type of motor oil varies for each engine, so always refer to the owner’s manual.
Typically, shaft-driven motorcycles require less maintenance. On the other hand, bikes equipped with a chain should be routinely inspected and oiled. A loose chain will need to be re-tightened back to the factory specs.
Without a properly functioning set of brakes, your all-terrain vehicle is a major safety hazard. Before taking your machine on a fun-filled excursion, test and inspect the entire braking system.
Follow these tips before heading out for your ride this weekend and everything should run smooth, if you find that you need a replacement ATV battery or motorcycle battery or you want to have your battery professionally tested, then please give us a call or stop by we will be happy to help. We also stock 6 & 12 volt chargers to keep those batteries in prime starting condition when it is not possible to use your motorcycle for extended periods.
The Monsoon season is upon us here in Tucson, and we’re getting ready for the raging thunderstorms that can cause damage to our homes and take out our basic utilities. Power outages due to lightening, strong winds, hail, and flash floods are all possibilities during the Monsoon season.
Here are some essential items to have on hand this Monsoon season:
Keep a flashlight and extra alkaline batteries for each member of your family in your emergency kit. These prove useful if the storm hits at night and knocks out your power system.
Radio for information:
When it storms in Tucson power and communication lines can go down. You should have a functional battery-powered NOAA Weather Radio and portable am/fm radio with extra alkaline batteries for emergency information. With a portable radio, you will be able to stay in touch with the outside world and know what to be prepared for if you must venture out.
Maintain your car battery:
No one wants to get stuck somewhere with a dead car battery, especially not during a thunderstorm. The extreme heat we experience just before and during the Monsoon rain season can damage your car battery. Be sure to maintain your car battery year round so you don’t get stuck unexpectedly.
In the summer, your battery is actually quite vulnerable to damage as a result of the heat. Corrosion, evaporation of battery fluids and explosion are just some of the ways the summer heat can harm your battery. There are some things you can do to prevent the heat from having a really bad affect on your battery.
Get to know your battery
Get out your car’s manual, and read the section that talks about the type of battery in your car. This will tell you what the battery indicator lights in the car mean and how to clean your battery. Make sure you wear safety goggles, gloves and a shirt with long, thick sleeves. You may need to add water to your battery. Always use distilled water.
Help your battery to complete its lifespan
Typically, a car battery has a lifespan of four years. You can help it reach this mark by protecting it from extreme temperatures. Try not to leave your car sitting out in the hot sun on a regular basis. Here’s why:
There is water in your battery’s fluids, and heat can cause this water to evaporate, which would be detrimental to your battery.
The heat also causes corrosion, which means your battery will slowly disintegrate. The battery gets hot on its own. Summer temperatures of 95 degrees or more are not going to help.
Keep your battery in a covered parking area or in your garage. If your car will be sitting for an extended period of time in an unprotected area, you could always take the battery out until you are ready to use it again.
Keeping your car in your garage during the cold winter months will help it reach life expectancy too.
Have your battery tested
General Power Batteries Inc. is a leading source of information on automotive batteries. They also inspect and test batteries. Having your car battery tested biannually or even every three months will ensure it doesn’t give out on you at the wrong time. A test will let you know the condition of your car’s battery and how soon you should plan on getting a new one.
A test can tell you a lot, but if your battery is leaking or bulging in places, then you need to replace it.
General Power Batteries Inc. services are available in Tucson, Arizona. Don’t hesitate to get in contact for all of your car, golf cart, and marine battery needs and questions.
Keeping a car battery charged is part of a good maintenance plan; you want to be sure you car starts when you need it most. Most people have had experience jump starting a car at one time or another, hooking the battery of a running car to your drained battery, but in this article, we’re discussing keeping your healthy battery fully charged, or putting a charge on a dead or nearly dead battery in your home.
There are several steps to assure you get a solid charge, and maintain a safe environment while charging to avoid the possibility of any injury.
For equipment, you should consider owning a trickle charger. This is a device that plugs into your wall outlet and has jumper cables attached to it. A trickle (slow) charge provides a charge to your battery on a ‘non-urgent’ basis, and batteries seem to hold charges that have been delivered by a trickle charger for a longer period of time.
In order to prepare your car and battery for charging, you’ll need to follow a few steps:
1) Clean the battery terminals if needed. If they have a white powder like substance on them, this is dried sulfuric acide and can burn your fingers, so use caution. Clean the terminals with dry sandpaper, or a clean cloth with baking soda.
2) Remove the cell caps, the series of small caps on top of the battery. Gases build up during charging and removing the caps allows the gas to escape safely.
3) Attach the jumper cables, matching the appropriate colors, or the POS and NEG indicators. Do not let the jumper cables touch each other.
4) Turn on the charger, and let it run overnight. Check the meter in the morning and if reads less than an ampere, the task is complete and you can unplug the charger, and remove the jumper cables.
5) Test. See if you can start the car easily, without effort. If you can, your charge was successful; if you can’t, you probably need a new battery.
You can check your battery’s charge from time to time with a tool called a hydrometer If your battery has good days and bad days, you can tell if you need to ‘top off’ a charge from the hydrometer reading. Come and visit us at General Power Batters, where are always happy test and service your battery for you.